Five Ways To Increase Energy Efficiency In Your Freezer Room Construction
When it comes to building a freezer room, you want to make sure that you are using the most efficient methods possible. This will save you money and keep your food cool for longer.
Here are five ways to increase energy efficiency in your freezer room construction.
1) Choose Insulation Wisely
The most effective way to save energy is by choosing the right insulation for your freezer room construction. The material used will depend on the climate conditions and the amount of heat loss experienced by the building. For example, if the building is located in a cold area with extreme temperatures, then rigid foam insulation will be required. However, if there is no need for thermal protection, then expanded polystyrene (EPS) is an excellent choice.
2) Ventilate Properly
Ventilation is an essential part of any freezer room construction. The objective is to prevent moisture build-up inside the building and maintain a good temperature balance. There should be adequate air flow in order to keep dampness from forming on cold surfaces (such as the walls).
3) Install A High-Efficiency Condensing Unit
The main function of a condensing unit is to change the latent heat of vaporisation into sensible heat by compressing the refrigerant gas. This means that instead of having to cool down the entire room, it only needs to cool down a small amount of air and water. This makes them more energy efficient than traditional units, which use twice as much electricity as their newer counterparts.
4) Reduce Cold Aisle Infiltration In Your Commercial Cool Room
One of the biggest problems with commercial cool rooms is the introduction of cold air from outside. This can be particularly problematic if your cool room is located in an industrial area, where there are many other large buildings around. The best way to reduce this infiltration is by installing a curtain wall or high-efficiency enclosure system.
5) Use A Radiant Barrier
A radiant barrier is a thin material that can be installed on the outside of your commercial cool room during freezer room construction. Radiant barriers are made from aluminium foil or plastics, and they reflect infrared light back into the atmosphere. This prevents the heat from outside buildings or industrial areas from entering your cool room and increasing temperatures inside.
If you have any questions about ways to increase energy efficiency in your freezer room construction or if you would like more information about refrigeration repair chat with a commercial refrigeration repair technician today.